BenchMixer XL Multi-Tube Vortexer

Designed for use in QuEChERS and other sample prepmethods. Supplied with instrument: tube carriers 7 x 50 ml (horizontally), 50 x 15 ml and 50 x 1,5/2 ml (vertically). FEATURES • Hands-free, high capacity vortexing • Up to 2500rpm, a true vortex in every tube • Assortment of accessories for a variety of tubes, flasks & plates • Pulsing program for interval mixing • Fits almost any tube rack The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of thetube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisleycontrolled by the digital microprocessor. A pulse mode allows for more vigorous mixing.Quiet operation, minimal vibration and a long service life are guaranteed by the preciselybalanced drive system and powerful motor. Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on thestationary steel rods and raise the top sample plate. one rod is shorter than the other,allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lowerthe plate into place and tighten the knobs. Select the desired speed and run time on thedigital control panel and press start. The BenchMixer XLQ can perform unattended mixing foras little as 1 minute or up to 100 hours. While the BenchMixer XLQ is configured primarily for QuEChERS protocols, additional racks are available toaccommodate nearly any type of vessel commonly found in the laboratory.